For a typical three-bedroom semi-detached house, an air source heat pump costs roughly £12,000 to £12,700 to install before any grant, based on the government’s own Boiler Upgrade Scheme data for the 6 to 10 kW sizes most semis end up with. In England and Wales, the £7,500 grant brings that down to roughly £4,700 to £5,200. Some online price guides quote lower figures, but the government figures are real prices recorded on completed jobs, not estimates.
Last updated: 3 October 2026. Prices and grant rules change, so check the official sources at the end of this guide.
The numbers at a glance
| Measure | Figure (rounded) |
|---|---|
| Median installed cost, 6 to 8 kW systems (2025/26) | About £12,200 |
| Median installed cost, 8 to 10 kW systems (2025/26) | About £12,700 |
| Middle half of installs for a 9 kW system | Roughly £11,000 to £15,500 |
| After the £7,500 grant, on those medians | About £4,700 to £5,200 |
| After the £9,000 oil and LPG grant, on those medians | About £3,200 to £3,700 |
These figures come from the government’s Boiler Upgrade Scheme statistics, as reported in third-party analyses of the data. They include the heat pump, labour and VAT, and they are the price before the grant is taken off. For the national picture across all home types, see our UK heat pump cost guide.
Why a semi is a good fit
A semi shares one wall with its neighbour, so it usually loses less heat than a detached house of the same size. That tends to mean a smaller, cheaper heat pump. But the real driver is how well insulated your particular house is, and two semis on the same street can need quite different systems.
What size heat pump does a 3-bed semi need?
You will see different answers online. Some guides say 6 to 8 kW, others say 8 to 10 kW. Both can be right, because the size depends on your home’s heat loss, not on the number of bedrooms. For reference, the median heat pump installed under the Boiler Upgrade Scheme is around 8 kW.
The only reliable way to find your size is a room-by-room heat loss calculation done by a qualified installer. Be wary of any quote that picks a size by rule of thumb without surveying the house. A unit that is too big costs more upfront, and one that is too small may leave rooms cold.
What is usually in the price, and what can add to it
A complete quote should cover the outdoor unit, a hot water cylinder, controls, pipework, the electrical connection and commissioning. What varies most from house to house is the extra work:
- Radiators. Heat pumps run at lower water temperatures, so some rooms need bigger radiators. How many depends on your heat loss calculation.
- Hot water cylinder. If you have no cylinder, or no space where the old one sits, this can add cost and work.
- Insulation. Poor loft or wall insulation pushes up the size you need.
- Where the outdoor unit goes. Semis often have limited side access, and siting can be affected by space and noise. Rules on where you can put the unit differ across the UK, so ask your installer and check with your local council if you are unsure.
Grant and VAT
In England and Wales, the Boiler Upgrade Scheme pays £7,500 towards an air-to-water heat pump. Eligible off-gas homes replacing oil or LPG heating can get £9,000 on applications from 21 July 2026 to 31 March 2027. Your MCS-certified installer applies for you and the grant comes off your invoice. Installing a heat pump is currently zero-rated for VAT until 31 March 2027, after which the rate reverts to 5%. We explain the rules in more detail in the main cost guide.
How to check a quote for your semi
- Ask for the room-by-room heat loss calculation, and check that the unit size matches it.
- Check the cylinder size, and whether any radiators are being replaced and how many.
- Make sure the grant is shown as a deduction and the VAT rate is stated.
- Get at least three quotes from MCS-certified installers and compare them line by line, not just by the total.
Is your quote normal? A Kilowiq worked example
Use the table to see where a quote for a 3-bedroom semi sits against the government data above, and what you would pay once the £7,500 grant is taken off.
| Quote before grant | Where it sits | You pay after the £7,500 grant |
|---|---|---|
| £11,000 | Bottom of the middle half for a 9 kW system | £3,500 |
| £12,200 | Median for 6 to 8 kW systems | £4,700 |
| £12,700 | Median for 8 to 10 kW systems | £5,200 |
| £15,500 | Top of the middle half for a 9 kW system | £8,000 |
Add the extras. Take the £12,700 median for 8 to 10 kW. If your quote does not already include radiator work and you need 5 to 6 radiators at £200 to £400 each (£1,000 to £2,400, from our radiator upgrade guide), the job comes to £13,700 to £15,100 before the grant, or £6,200 to £7,600 after it. That is our own arithmetic, and it only applies if those radiators are not already in the price.
Three tips from Kilowiq
- Ask each installer to state in writing how many radiators are included and at what price.
- A quote near the bottom of the range is not automatically a bargain. Check what it leaves out before you compare totals.
- Ask for the unit size in kW and the heat loss calculation behind it, so you can compare like with like.
Frequently asked questions
How much does a heat pump cost for a 3-bed semi after the grant?
On the government’s median prices for typical semi sizes, roughly £4,700 to £5,200 with the £7,500 grant. Your quote could be lower or higher depending on the work your house needs.
Will I need new radiators?
Some homes do and some do not. It depends on your heat loss and your existing radiators, which the installer’s calculation will show.
Why do other websites quote lower prices?
Some price guides give ranges that start below £10,000. Those can reflect simple jobs or older prices. We prefer the government’s figures because they are based on real installations.
